Wall Mounting; English: Safety Precautions - Tenda RX12V1.0 Quick Installation Manual

FAQ
Q1: I cannot log in to the web UI by visiting tendawifi.com. What should I do?
A1: Try the following solutions:
• If you are using a WiFi-enabled device, such as a smartphone:
− Ensure that it connects to the WiFi network of the router.
− Ensure that the cellular network (mobile data) of the device is disabled.
• If you are using a wired device, such as a computer:
− Ensure that tendawifi.com is entered correctly in the address bar, rather
than the search bar of the web browser.
− Ensure that the computer is connected to the LAN port of the router properly
using an Ethernet cable.
− Ensure that the computer is set to Obtain an IP address automatically
and Obtain DNS server address automatically.
If the problem persists, reset the router by referring to Q2 and try again.
Q2: How to restore my device to factory settings?
A2: When your device is working properly, hold down the RST or Reset button of
your device using a needle-like item (such as a pin) for about 8 seconds, and
release it when the LED indicator blinks red fast. When the LED indicator lights
solid green, your device is reset successfully.
Q3: When I use the product as a router, I cannot access the internet after the
configuration. What should I do?
A3: Try the following solutions:
• Check whether the WAN port of the router is connected to a modem or
Ethernet jack properly.
• Log in to the web UI of the router and navigate to the Internet Settings page.
Follow the instructions on the page to solve the problem.
If the problem persists, try the following solutions:
• For WiFi-enabled devices:
− Check whether your WiFi-enabled devices are connected to the WiFi network
of the router.
− Visit tendawifi.com to log in to the web UI and change your WiFi name and
WiFi password on the WiFi Settings page. Then try again.
• For wired devices:
− Check whether your wired devices are connected to a LAN port properly.
− Check whether wired devices are set to Obtain an IP address automatically
and Obtain DNS server address automatically.
03

Wall Mounting

This router can be installed on the wall with two screws. The recommended wall
mounting tools are as follows:
[Expansion bolt] Outer diameter: 6.0 mm; Length: 26.4 mm
[Screws] Thread diameter: 3 mm; Length: 14 mm; Head diameter: 5.2 mm

English: Safety Precautions

Before performing an operation, read the operation instructions and precautions to be
taken, and follow them to prevent accidents. The warning and danger items in other
documents do not cover all the safety precautions that must be followed. They are
only supplementary information, and the installation and maintenance personnel need
to understand the basic safety precautions to be taken.
- The device is for indoor usage only.
- For desktop mounting, the device must be horizontally mounted for safe use.
- If the device supports wall mounting, the device is only suitable for mounting at
heights ≤ 2 m.
- Do not use the device in a place where wireless devices are not allowed.
- Please use the included power adapter.
- The mains plug is used as the disconnect device, and shall remain readily operable.
- Operating environment: Temperature: 0℃ – 40℃; Humidity: (10% – 90%) RH,
non-condensing; Storage environment: Temperature: -40℃ to +70℃; Humidity:
(5% – 90%) RH, non-condensing.
- Do not use the power adapter if its plug or cord is damaged.
- Disassembling or modifying the device or its accessories without authorization voids
the warranty, and might cause safety hazards.
For latest safety precautions, see Safety and Regulatory Information on
www.tendacn.com.