Safety Warnings - Yamato CD 20 BL Instruction Manual

mod. CD 20 BL (cod. 83513)
Read instruction manual.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or battery pack together with household waste
Ioni di
litio
material!
In observance of the European Directives, on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste Batteries and Accumulators
and their implementation in accordance with national laws, electric equipment and
batteries and battery pack(s) that have reached the end of their life must be col-
lected separately and returned to an envi- ronmentally compatible recycling facility.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery
cartridges and chargers may cause injury and/or fire.
Intended use
The tool is intended for drilling and screw driving in wood, metal and plastic.
Vibration
NOTE: The declared vibration emission value has been measured in accordance with the standard test
method and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared
emission value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running idle in addition to the trigger time).
WARNING: Wear ear protection.

SAFETY WARNINGS

General power tool safety warnings
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.