EarthWay POLAR TECH 90950 Assembly Instructions

50 lb ice melt spreader

Download this manual

MODEL # 90950

spreader. spreader. Our customer support team is

standing ready to ensure your success. Please

line of commercial, lawn & garden tools.

NOTE: The large opening is designed to allow ice

melt to flow through spreader without the need

for an agitator. This unit is not designed for

fertilizer.

ICE MELT - LARGE OPENING

90950 – 50lb Ice Melt Spreader

Thank you for selecting

EarthWay for your

spreader needs. Our

production team in

Northern Indiana takes

pride in building this

For spreading

fertilizer, please

select the right

spreader.

ASSEMBLY INSTRUCTIONS

ASSEMBLY

STEP 1: Remove spreader from carton and

pull handle into position shown at right. Tighten

wingnuts to secure.

STEP 2: Install CONTROL ROD into handle as shown

above. TIP: Install the CONTROL ROD using pliers to

squeeze into LEVER.

STEP 3: ROTATE FORWARD Insert CONTROL ROD into

pivot at bottom of hopper and secure with hair pin

clip (Shown to the right.)

50 LB Ice Melt

Spreader

PAGE 1

Page 1 Please clip (Shown to the right.) contact us at www.EarthWay.com to see our full line of commercial, lawn & garden tools. NOTE: The large opening is designed to allow ice melt to flow through spreader without the need for an agitator.
Page 2 (inside open end of tubing) to help prevent corrosion).  Gears are permanently lubricated at the factory. Do not open the GEARBOX or dirt may enter. PARTS LIST HOW TO ORDER PARTS Call or Email: TURF DEPOT 800-305-9255 or earthway@turfdepot.com 90950 – 50lb Ice Melt Spreader PAGE 2...
Page 3 50 LB Ice Melt Spreader MODEL # 90950 ASSEMBLY INSTRUCTIONS 90950 – 50lb Ice Melt Spreader PAGE 3...
Page 4 If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, improper storage, or normal wear and tear as determined by EarthWay.