Advertisement
CLEANING AND MAINTENANCE
HOW TO CLEAN THE MILK RESERVOIR AND FROTHING TUBE
1.
Remove the milk reservoir from the unit (tilt it up before pulling it out). Transfer any
remaining milk to another container and refrigerate.
2. Wash the milk reservoir and its lid thoroughly with warm, soapy water. Rinse well. Do
not use abrasive cleansers and scouring pads, as they will scratch the finish. The milk
reservoir is not dishwasher safe.
3. Attach the portafilter with an empty basket in it to the brew head on the unit.
4. Place a large empty cup under the brew head, and be sure there is water in the
water reservoir.
5. Add fresh water to the milk reservoir and return it to the unit.
6. Set the froth strength to Extra. Use the silver froth tube lever to position the froth
dispensing tube over the cup.
7.
Press the CLEAN button. Hot water and steam will come out in bursts. Do not remove
the cup until the clean cycle has completely ended (the unit will beep three times
and other function buttons will light up). NOTE: If the clean cycle is canceled before
finishing, wait a few minutes before removing the cup as more hot water and steam
may be expelled.
8. After the cycle ends, dispose of the water in the mug and any water left in the milk and
water reservoirs.
21
Advertisement
