Advertisement
OPERATING INSTRUCTIONS
9. To discard a spent capsule, remove the portafilter and let it cool. Remove the capsule
holder, then dispose of the capsule properly.
HOW TO MAKE A CAPPUCCINO
A cappuccino is a delicious beverage made with equal parts espresso, steamed milk, and froth.
When using the cappuccino presets, there is no need to manually froth the milk; it will occur
automatically.
1.
Make sure the unit is plugged in.
2. Turn the unit on using the power switch located on its side.
3. Fill the water reservoir as directed on p. 12.
4. Fill the milk reservoir with cold milk between the MIN and MAX lines and insert it onto the
unit. (If the milk reservoir is not on the unit, the cappuccino function will not work.)
5. Set the froth strength to Standard.
6. Place a heatproof cup or mug on the metal coaster over the drip tray.
7.
Use the silver froth tube lever to position the froth dispensing tube over the cup.
8. Fill the portafilter with ground beans or a capsule and attach it to the brew head as
directed on pp. 13–14.
9. Choose to brew a single or double cappuccino by pressing the appropriate button. The
PREHEATING light will come on. It will turn off when the unit has finished preheating and
the brew cycle has begun. When brewing is complete, the unit will beep three times, and
your cappuccino will be ready to enjoy.
10. When the brew cycle ends, the unit will go into standby mode and will be preheating in
the background. If no button is pressed within 20 minutes, it will switch to sleep mode.
16
Advertisement
