Advertisement
OPERATING INSTRUCTIONS
HOW TO FILL THE WATER RESERVOIR
To fill the water reservoir, you may either use a pitcher to fill
it with water while on the unit or remove it from the unit to
fill it up at the sink. Open the lid and fill the reservoir with the
desired amount of cold water between the MIN and MAX
markings on the tank. Never use warm or hot water to fill
the water reservoir. Close the water reservoir lid and place it
back in the unit, if necessary, ensuring it fits tightly in place.
HOW TO FILL THE MILK RESERVOIR
If you plan to prepare cappuccino or latte, you will need to
fill the milk reservoir; it can be left empty or even off the unit
when preparing espresso.
To remove the milk reservoir from the unit, tilt it up before
pulling it out. Fill it with cold milk to between the MIN and
MAX markings on the tank. To put the milk reservoir back on
the unit, tilt it down before sliding it firmly back into place.
NOTE: You can use any type of milk—whole, skim, soy, oat—
to make froth.
12
Advertisement
