Suitcase Weight - Toro 79487 Manual

6
Installing Additional
Weights
Machines Equipped with a Bagger
Kit Only
Parts needed for this procedure:
Suitcase weight (machines equipped with a bagger
1
kit only)
Procedure
For machines equipped with a bagger kit only:
Install the included additional suitcase weight to the
machine using 2 bolts (3/8 x 2-3/4 inches) as shown
in Figure 13.
Refer to the following table for the necessary number
of weights required for each model and deck size:
Figure 13
60 inch TimeCutter model with 3 weights shown.

1. Suitcase weight

2. Bolt (3/8 x 2-3/4 inches)
3. Weight-mounting bracket
g467410
4. Washer
5. Locknut (3/8 inch)
TimeCutter Max models
Deck Size
60 inch
54 inch
50 inch
42 inch
Deck Size
60 inch
54 inch
48 inch
Important:
Whenever you remove the bagger
attachment, remember to remove the front weights
to return the proper stability to the machine.
Maintenance
Checking the Seat Belt
Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper
operation of the retractor and buckle. Replace the
seat belt if it is damaged.
Checking the Rollover
Protection System (ROPS)
Service Interval: Before each use or daily
Visually inspect the ROPS for loose hardware or any
other possible problem. Tighten the hardware or
correct the problem before operating.
8
Total Weights Required
4
5
5
7
Titan models
Total Weights Required
2
3
4