Table of Contents
Advertisement
8.1 Installing DataView
NOTE: When installing, the user must have Administrative access rights
during the installation. The users access rights can be changed after the
installation is complete. DataView
multi-user system.
1.
Insert the DataView thumb drive into an available USB port on your com-
puter. If Autorun is enabled, an AutoPlay window appears on your screen.
Click "Open folder to view files" to display the DataView folder. If Autorun is not
enabled or allowed, use Windows Explorer to locate and open the USB drive
labeled "DataView."
When the DataView folder is open, find the file Setup.exe located in the root
2.
directory of the USB drive, and double-click it to run the installation program.
3.
The DataView setup screen appears.
In the upper left corner of the screen, choose the language vesion of the
Setup interface. (All Setup screens and diaogs will immediately appear in the
selected language.)
In the lower left corner are the available installation options. In addition to the
DataView software, you can select "Adobe Reader." This links to the Adobe
web site where you can download the latest version of Reader. This program
is required to view DataView .pdf documents. The option Firmware Upgrades
links to the website where you can check for new firmware updates for the
instrument. Finally, User Manuals displays a list of .pdf files contained in the
USB drive that accompanies DataView. (DataView also comes with a Help
system that is installed with the program files.)
To install DataView, select DataView in the Options list and click Install.
52
Find Quality Products Online at:
DATAVIEW
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE
SOFTWARE AND DRIVERS.
GlobalTestSupply
www.
CHAPTER 8
®
SOFTWARE
®
®
must be reinstalled for each user in a
Ground Resistance Tester Model 6471
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
