Simple Troubleshooting Guide - Pyle plus Owner's Manual

Simple Troubleshootong Guide
English
Problem Cause/Solution
No power
Check and make sure whether the fuse is blown,
rep 1 ace with the proper va 1 ue if necessaiy.
Some errors occur in the LCD oi' no function
when pressing the button.
"it Press the
RESET
button.
Unable to receive stations.
it Check and make sure whether the antenna is
inserted or the antenna is properly connected,
if so. insert the antenna or connect it properly.
Poor effect on receiving a station.
Antenna may not he the proper length. Make
s are the a ntenn a is fully ex ten d ed o r b ro ken:
if broken. Replace the antenna with a new one.
^ The broadcasting signal is too weak.
^ The antenna is poorly groanded, check and
make sure the antenna is properly grounded
at its mounting location.
ACDs cannot be loaded.
★
AC D.v is loaded i n t h e m e cha n istn.
The stereo indicator!
CSZ)
i
is flashing. Tune in the frequeney accurately.
The broadcasting signa 1 is too ^veak.
(Set to
///e
MONO mode) (page 12}
No picture.
The CDs is dirty or damaged..
The picture noise appears.
Note: If any of the problem persist after eheek list had been made, consult your nearest service dealer.
Never attempt to d is assemble your unit by you/ 's e If
23