Advertisement
Wireless BT Function
1. The receiver connects to your Bluetooth-enabled device, allowing the system to
receive your wireless bluetooth signal and stream audio to any connected
speaker system.
2. Press the 'ANALOG INPUT' on the remote control or on the control panel of the
receiver system, then enter to 'BT' mode--as indicated on the display screen.
3. Ensure Bluetooth is activated on your device and search for bluetooth Network
Named: PYLEUSA
4. No password is required for connecting.
ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT694BT to play
audio from any TV with a single HDMI cable. It can be adjusted either on the front
control panel or via the included remote control.
Enable your TV to send audio signal upstream to a connected speaker system or AV
receiver while eliminating additional cable connections and clutter from an optical
audio cable (S/PDIF). ARC audio transmission links your speaker output to your
television controls, meaning you do not need an external / additional remote or
interface to con gure audio levels. Enjoy an optimal multimedia home theater
experience by connecting your television and Hi-Fi equipment into one, seamless
entertainment system.
FM RADIO
Press 'AUTO " TUNE+/-" CH+/-' button on the remote control. Operate automatic
search and save station, manually save and select the stored station function.
DSP Sound Field Control
Press 'DSP' or 'CH MODE' on the remote control. 7 di erent sound eld e ects can
be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)
NOTE: Pressing those button on the digital input channel is invalid
LOUD
Press 'LOUD ON' on the remote contnol. The low frequency of this unit can be
increased appropriately at low volume. Then press 'LOUND OFF' to cancel this
function.
DISPLAY
Press 'DISPLAY' button on the remote conlrol to adjust di erent display mode.
RESET
Press 'RESET' button on the remote control to restore to the factory setting state.
MUTE
Press 'MUTE' button on the remote control to turn ON or OFF MUTE function.
STANDBY
Press 'STANDBY' button on the remote control to turn ON standby state.
Press again to cancel standby mode.
8
www.PyleUSA.com
Troubleshooting
Problem
Probable Cause
The power socket is in poor
No display
contact or without electricity
1. The speaker wiring is wrong.
2. The playback source doesn't
corresponds to the selected
There's display but
signal state
no sound output
3. The volume level is in lowest
output state.
4. MUTE is activated
1. The remote transmitter window
is not aimed at the local
Remote control
receiving window.
doesn't work
2. There are obstacles between
the unit and the remote control
3. Drained remote control batteries
Being disturbed or improperly
Out of control
operated
sound distortion
Main volume adjustment is too much Turn down the main volume
The channel sound
Channel sound mode is not correct
is wrong
Music les in USB
can't be played for
The USB les is not supported
long period of time
The phone cannot
1. Tha bluetooth function of
transmit audio to
mobile phone is not opened.
the ampli er via
2. No music is played on the
bluetooth.
phone.
3. Ampli er Bluetooth is not
paired with mobile phone
bluetooth.
4. Incorrect ampli er input channel
5. Bluetooth can't connect.
If you are still experiencing issues, please contact your authorised local dealer or
contact us on www.PyleUSA.com.
Solution
Check the power supply and plug
of the socket.
1. Connect the speaker line
according to the wiring diagram
2. Select the input state which is
playing
3. Turn the main volume & adjust
the knob clockwise.
4. Disactivate MUTE
1. Aim at the host receiving
window.
2. Remove obstacles
3. Replace new battery
Turn it OFF and than turn it ON
Press 'CH. MODE' on the panel or
remote control
Delete unsupported les
1. Turn ON bluetooth
2. Open the phone and play music
3. Rematch Bluetooth connection
4. Switch the ampli er input into
'BT' channel.
5. Turn o other bluetooth devices
9
www.PyleUSA.com
Advertisement
