Notes On Installation - Pyle plus Owner's Manual

Notes on installation
English
®=The unit is designed for
12V DC,
negative ground operation system
only. Before installing the unit,
make sure your vehicle is connected
to
DC 12V
negative ground electrical
system .
cF=The Negative batteryterminal
must be disconnected before
making connections,whichcan
reducedamaging the unit due
to short circuit.
(3= Be sure to connect the color coded
leads correctly according to the
diagram. Incorrect connections
may cause the unit malfunction or
damagethe vehicles electrical
system.
Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body .
(3=Do not block vents or radiator
panels. Blocking them will cause
heat to build up insideand may
result in fire.
After the completion of the
installation and begin to play
the unit( including replacing
the battery),pleasepressthe
RESET
button on the front panel
with pointed objects(suchas
bail-point pen)to set the unit to
initial status .
3