Basic Operation - Pyle plus Owner's Manual

Basic Operation
English
Initial system start-up
1 .Operating the unit for the first
time or after replacing the car
battery,you must reset unit,pr¬
ess n (RES)button whit a poin¬
ted object (such as a ball point
pen)to set the unit to initial
procedure.
★ Note :when some errors occur in the
LCD display you can also pr¬
ess RESET button to resume
to normal And it will erase the
clock setting and some mem¬
orized functions.
Turning the Unit on /off
Vol/Bass/Tre/Bal(L-R)
3.For Volume ControlH ,roatte,vol
kndob clockwise to increaes the
sound level,and rotate it anticlock
wise to decreaes the sound level.
4.Repeatedly press Q (SEL)button
to select the desired mode in the
following order:
BAS -A
TRE -|
BAL I
★ Note :After selecting the desired mode,you
can adjust the curren level by rotating
theg(VOL)knob.
★ Note :lf you don jtadjust HvOL) knob within
Sseconds after selecting the desired
mode the unitwill automatical! return
to the current mode being disp layed.
Press H(PWR) button to turn on
the unit ,and press it again to turn
off the unit.
BAL
★ Note :After the unit is off ,if the volume
level is higherthan it is in initial
setting ,it will resume,to initial
status;if it is lower than that In
initial status ,it will store in the
status which you set.
8