Table of Contents
Advertisement
Section 6 – Procedures
6.1 Use the emergency-
lowering function
If there is a primary power failure, you can use the
emergency-lowering function to lower the platform.
WARNING
Crush hazard. Keep clear of the lift mechanism
when you use the emergency-lowering function. If
you do not obey, there is a risk of death or serious
injury.
Hold the emergency-lowering switch
right to fully lower the platform.
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
SJ3215 E, SJ3219 E, SJ3220 E, SJ3226 E, SJ4726 E, SJ4732 E, SJ4740 E
6.2 Release the brakes
Runaway hazard. After you release the brakes,
the MEWP rolls freely on slopes. Do not manually
disengage the brakes unless the MEWP is on a
level surface or the MEWP is fully restrained.
Keep the travel path clear at all times.
If you do not obey, there is a risk of death, serious
injury, and/or MEWP damage.
to the left or
1
1
2
manually
WARNING
1. Make sure that the MEWP is on firm, level
ground.
2. Turn the main power disconnect switch to the
on position.
3. Pull the emergency-stop button on the platform
control console.
4. Pull the emergency-stop button on the base
control console.
5. Turn and hold the off/platform/base key switch
to the base position
6. Hold the brake release button
The beeper makes a sound to indicate the brake
is released.
7. Push the emergency-stop button to engage the
brakes.
for 3 seconds.
2
249533ABA
55
Advertisement
Table of Contents
