14 Image customisation
There are three image customisation modes: Histogram, Auto and Manual.
Briefly press the power button (A) to enter the normal measurement mode and hide
the submenus.
14.1 Manual mode
To enter the Manual mode, press the right ► button (H).
This mode allows you to set the minimum or maximum level by pressing and holding
the left ◄ (F) or right ► (H) button, respectively.
Briefly press the left ◄ (F) and right ► (H) buttons to set the desired value.
To exit the submenu, press the power button (A).
14.2 Auto mode and Histogram mode
Auto mode: The thermal image of the minimum and maximum temperatures de-
termines the level and range. The relationship between temperature and colour is
linear.
Histogram mode: The thermal image is enhanced by the histogram algorithm. The
relationship between temperature and colour is not linear. Some parts of the image
are enhanced.
52