4 Intended use
The product is a pocket-sized thermal imaging camera. It can be used to find hid-
den hot spots, energy leaks, structural defects, pipe jams, HVAC faults and other
problems that can be discovered through thermal surface imaging. The device can
display temperatures up to 550 °C and show results on an LCD screen in real time.
Data can be recorded and saved to a microSD card.
Contact with moisture must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product
may be damaged. In addition, improper use can result in other hazards.
Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
All company and product names contained herein are trademarks of their respective
owners.s
All rights reserved.
USB4
, USB Type-C
®
Forum.
5 Scope of supply
Thermal imaging camera
USB-C
cable
®
SD card
Micro SD adapter
Carrying bag, strap
Operating instructions
and USB-C
are registered trademarks of USB Implementers
®
®
33