Lipo Batteries - VOLTCRAFT WBP-110 Operating Instructions Manual

If it is no longer possible to operate the product safely, take it out of operation
and protect it from any accidental use. Safe operation can no longer be guar-
anteed if the product
– is visibly damaged,
– is no longer working properly,
– has been stored in adverse ambient conditions for extended periods,
Consult an expert when in doubt about the operation, safety or connection of
the device.
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.

8.2 LiPo batteries

The rechargeable battery is permanently built into the product and cannot be
replaced.
Never damage the battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire! Unlike conventional batteries/rechargeable
batteries (e.g. AA or AAA type), the casing of the LiPo rechargeable battery does
not consist of a thin sheet but rather a sensitive plastic film only.
Never short-circuit the contacts of the battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
Charge the rechargeable battery regularly, even if you are not using the product.
Due to the rechargeable battery technology being used, you do not need to
discharge the rechargeable battery first.
Do leave the battery unattended when it is charging.
When charging, place the product on a surface that is not heat-sensitive. Nor-
mally, a certain amount of heat is generated during charging.
35