Roof And Final Assembly - atd models ATD009 Instruction Manual

10. Detach the roof. Next, locate the glazing sheet
and cut out the sky lights (x6). Then, apply a
small amount of glue to each window and
position them over the openings on the roof.
12a. Detach the RSJ components. Bond each
component together.
You have now completed the Stone Mill. We hope you enjoyed and
successfully built the kit! To view our other card kits, more products and find your
We'd love to see photos of your finished models. Please send them to
enquiries@atdmodels.co.uk for a chance to be featured on our social media pages.
local stockist, visit www.atdmodels.co.uk
11. Apply a bead of glue to the tops of each
wall. Then fold the roof along the crease
line and position it on top of the building.
We recommend using ATD low-tac masking
i
tape to assist on this step whilst the glue
cures.
12b. Apply a bead of glue in the hole above
the top goods doors. Then, carefully thread
the RSJ through the hole and hold in position
until the glue has semi-cured.