atd models ATD008 Instruction Manual

ATD008 - OO (1:76 Scale) Boiler House and Chimney
- Instruction Manual
Tools Required
Modellers Knife (with a fresh blade)
Cutting Mat
Modelling Glue (we recommend Deluxe Materials roket card glue)
Fine Tip Applicator
Low-tac Masking Tape
Clips / Clamps
Tips
Prior to starting your build, we recommend reading through the
instructions to familiarise yourself with the build style of the kit.
We recommend painting any white edges as you remove the
components from the sheet to improve the finished look. We
advise watercolour paints for the best finish.
Each component is held in the sheet using score lines,
indicated by a scissor symbol. To remove the
component from the sheet, carefully run the tip of
your modelling knife through the score line.
Remove each component as it is required to prevent
losing or mixing it up with another component.
Ensure that glue is distributed evenly and not too close
to the edge as it may ooze out when pressure is applied.
Use low-tac masking tape, clamps and weights to aid the
assembly process.