Selecting The Mounting Location - PrimeVOLT PV 3K6HB-60 User Manual

Single-phase ESS Inverter User Manual
3.2

Selecting the Mounting Location

3.2.1 Installation Environment Requirements
a. With an IP65 protection rating, the inverter can be mounted indoors or outdoors.
b. The mounting location must be inaccessible to unrelated personnel since the enclosure and heat
sinks are extremely hot during operation.
c. Do not install the inverter in areas containing highly flammable materials or gases.
d. To ensure optimum operation and long service life, the ambient temperature must be below 50℃.
e. The inverter must be mounted in a well-ventilated environment to ensure good heat dissipation.
f. To ensure long service life, the inverter must not be exposed to direct solar irradiation, rain,
or snow. It is recommended that the inverter be mounted in a sheltered place.
g. The carrier where the inverter is mounted must be fire-proof. Do not mount the inverter on
flammable building materials.
h. Do not install the inverter in a rest area since it will cause noise during operation.
i. The installation height should be reasonable, and please make sure it is easy to operate and view the
display.
j. Product label and warning symbols shall be clear to read after installation.
k. Please avoid direct sunlight, rain exposure, snow cover.
No direct sunlight
Direct sunlight
No rain exposure
Rain exposure
No snow cover
Snow cover
Safety
08