Maintenance
8.3 Removing the Inverter
WARNING
Perform the following procedures to remove the inverter:
Step 1. Disconnect all cables from the inverter, including communications cables, DC input power
cables, AC output power cables, and PGND cable, as shown below.
PV Connectors Removing Detail
Step 2. Remove the inverter from the mounting bracket.
Step 3. Remove the mounting bracket.
Before removing DC input connector, double check DC input switch is turned
to OFF to avoid inverter damage and personal injury.
Grid/BACKUP Connectors Removing Detail
NOTE
To remove the PV/Grid/BACKUP connectors,
insert the removal tool into the bayonet
according to the position indicated in the
drawing, press inward, and then take out
the connector outward.
Single-phase ESS Inverter User Manual
85