In Case Of Fire - Raider RD-GLM16 User Manual

Table of Contents

Advertisement

Available languages

Available languages

eyes. If gasoline or oil comes into contact with the eyes, immediately wash them with clean water. If
irritation still occurs, see a doctor immediately.
• If battery fluid gets on your skin, wash it quickly with soap and water. If necessary, seek medical
attention.
• If battery fluid gets into your eyes, flush them with clean water for a minimum of several minutes
and seek medical attention immediately.

IN CASE OF FIRE:

• If the engine catches fire or smoke appears from the engine, turn off the product and move to a
safe place.
• To extinguish the fire, use a suitable fire extinguisher (snow, dust, halotron).
• DO NOT PANIC. Panic can cause even more damage.
REMIDUAL RISKS
• Even if the device is used according to the instructions, it is not possible to eliminate all risks asso-
ciated with its operation. The following risks are possible due to the design of the device:
• Mechanical hazard caused by cutting and throwing.
• Electrical hazard caused by contact with high voltage parts (direct contact) or with parts that
have become high voltage due to device malfunction (indirect contact).
• Heat hazard resulting in burns or scalds and other injuries caused by possible contact with
high-temperature objects or materials, including heat sources.
• Risk of noise leading to hearing loss (deafness) and other physiological disorders (eg loss of bal-
ance, loss of consciousness).
• Risk of vibration (leading to vascular and neurological damage in the palm and hand system, for
example the so-called "white finger disease").
• Hazards caused by a lack of ergonomic principles in the construction of the machine, for example,
hazards caused by the unnatural position of the body or excessive stress unnatural to the anatomy
of the human hand, relate to the design of the handle and the balance of the machine.
• Hazards caused by unexpected starting, unexpected over-speeding of the engine, caused by a
defect / failure of the control system refer to the defects of the handle and the placement of the
guides.
• Hazards caused by not being able to stop the machine in the best way relate to the strength of
the handle and the placement of the engine shutdown controls.
• Hazards caused by a defect in the machine control system relate to the strength of
the handle, the placement of the guides and the markings.
• Hazards caused by flying objects or splashes of liquids.
UNPACKING
• Carefully remove the product from the box.
• Carefully inspect all parts. If any part is damaged or missing, contact your dealer or authorized
service center.
• Do not throw away the packaging materials until you have carefully examined them to make sure
they are not part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) cannot remain within the reach of children,
they could be a source of danger. Do not allow children to play with plastic bags, foil or small parts.
Danger of swallowing or suffocation!
• Disposal must be carried out in accordance with the regulations in force in the country where the
equipment is installed.
• Make sure that bags and containers made of plastic material are not thrown freely into the envi-
ronment because they pollute it.
• If you have any doubts, do not use the machine, but have it checked at an authorized service
center.
• The machine is shipped partially disassembled and packed in a metal crate to protect it during
transportation.
• Remove the screws and nuts connecting the upper cassette to the base.
61

Advertisement

Table of Contents
loading

Table of Contents