Launch EM101N User Manual page 8

LAUNCH
Input impedance
Vertical scale
Sample bit
Max. input voltage
Probe attenuation coefficient
Trigger type
Trigger mode
Auto measurement items
2. When used as Multimeter
Name
DC Voltage
AC voltage
DC current
AC current
Resistance
Diode
Make-and-break detection
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069
EM101N New Energy Oscillograph Multimeter User Manual
1MΩ±2%, 15pF±5pF parallel
10mV/div~10V/div
8 bits
40V peak value (DC + AC peak value)
1X, 10X,100X (need probe support)
Edge
Auto, Single
Peak value, average value, max value, min value,
frequency, cycle
Automatic range, measurement range: ±600V
Automatic range, measurement range: ±600V
Automatic range, measurement range: ±10A (external
sensor should be connected for large range current).
Automatic range, measurement range: ±10A. Average
value measurement (external sensor should be
connected for large range current).
Automatic range, measurement range: 0Ω~60MΩ
0V~2.0V
Make a sound when below 50Ω
3
Descriptions