Table of Contents
Advertisement
LAUNCH
General Care
Do not store or leave the EM101N where the device will be exposed to direct sunlight for long periods of
time.
Caution
To avoid damages to the device or probes, do not expose them to sprays, liquids or solvents.
Cleaning
Inspect the device and probes as often as operating conditions require. Make sure the device is
disconnected from all power sources.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the EM101N and probes with a lint-free cloth. Use care to avoid
scratching the clear glass display filter.
2. Use a soft cloth dampened with water to clean the device.
Caution
To avoid damages to the surface of the device or probes, do not use any abrasive or chemical cleaning
agents.
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069
EM101N New Energy Oscillograph Multimeter User Manual
5 Care & Maintenance
24
Advertisement
Table of Contents
