Overview; Product Profile; Accessories Included - Launch EM101N User Manual

LAUNCH

1.1 Product Profile

This EM101N is composed of hardware and software. Hardware includes EM101N module and
connection wire. The Oscilloscope and Multimeter APP are installed on diagnostic tool.
Automotive oscilloscopes assist the auto repair technician with the ability to quickly identify faults on
automotive electronic equipment and wiring. The oscilloscope sweep speed is far greater than the signal
frequency of such vehicles, usually 5-10 times of the measured signal and quickly acquire the circuit
signal while slowly displaying the waveform for observation and analysis.
The built-in multimeter provides simple measurements to test voltage, current and resistance to help
determine faults.

1.2 Accessories Included

Common accessories are same, but for different destinations, the accessories may vary. Please consult
from the seller or check the package list supplied with this tool together.
No.
EM101N
1
BNC to 4mm test leads
2
Multimeter test pen (black +
3
red)
Multimeter probes (black +
4
red)
www.diagtools.eu; info@diagtools.eu; Pernavas 43A-9, Riga, Latvia, LV-1009; +37129416069
EM101N New Energy Oscillograph Multimeter User Manual

1 Overview

Name
Dedicated cable used to connect sensor and EM101N to
test all types of vehicle signals.
Connect to COM and V/Ω terminal of the sensor module
when using multimeter.
The multimeter probes offer a quick and easy solution,
where a permanent connection is not required. The 4 mm
socket in the handle of the probe connects straight into
the BNC to 4mm test leads.
Description
1