Maintenance - Viessmann VITOCAL 100-AW Installation, Service And Operating Instruction

Table of Contents

Advertisement

Service

Maintenance

Refrigerant
R32
According to the Fourth Assessment Report adopted by the Intergovernmental Panel on Climate Change
*1
(IPCC)
According to the Fifth Assessment Report adopted by the Intergovernmental Panel on Climate Change
*2
(IPCC)
68
Vitocal 100-AW AM2V Installation, Service and Operating
Cleaning
Note:
Commercially available cleaners and special
cleaners for heat exchangers (evaporators) may
cause damage to the heat pump.
H Clean the surfaces of the unit with a damp cloth
only.
H If necessary, clean the shutters of the heat
exchanger (evaporator) with a long bristle brush.
Operating module of the heat pump controller
The surface of the operating module can be cleaned
with the microfibre cloth.
Technical inspection and maintenance of the
heating system. Regular maintenance ensures
trouble-free, energy-efficient and environmentally-
friendly operation in the heating/cooling mode.
For this purpose, it is best to contract a specialist
company for inspection and maintenance.
Damaged connection wires
If the connection wires of the unit or of outdoor
accessories are damaged, they must be replaced
with specific connection cables. Only use the
cables recommended by the manufacturer for
replacement. Notify a specialist company for this
purpose.
Refrigerant
The unit contains fluorinated greenhouse gases
(a refrigerant) listed in the Kyoto Protocol. The
refrigerant type which the device operates with is
indicated on the rating plate.
The Global Warming Potential (GWP) of the
refrigerant is given as a multiple of the GWP of
carbon dioxide (CO
CO
is 1.
2
Global Warming Potential GWP
675
/677
*1
*2
). The GWP of carbon dioxide
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

0200280340043051078

Table of Contents