Vitocal 100-AW AM2V Installation, Service and Operating
Checking Fuses
Fuse F3 of the indoor unit is located on the main
board of the indoor unit.
F3
Fuse type:
- T 5.0 A H, 250 V~
1. Switch off the power supply
2. Check the fuse, replace if necessary.
1
Incorrect or improperly installed fuses may lead to
an increased risk of fire.
1
Removing the fuses does not result in the load
circuit being disconnected from voltage. Contact
with any live parts may lead to electrocution. When
working on the unit, it is essential that the load
circuit is also disconnected.
IMPORTANT
IMPORTANT
Service
67