Table of Contents
Advertisement
General Information
Intended Use
The Vitocal 100 is only intended to be installed and
operated in sealed unvented heating systems with
due attention paid to the associated installation,
service and operating instructions. The heat pump
is only designed for:
H Space Heating
H Space Cooling
H DHW Heating
Commercial or industrial use for a purpose other
than the heating of heating water shall be deemed
inappropriate.
System Examples
Fittings and Sealing Points
Prior to Installation
Before placing Vitocal 100 AW in its installation
location, ensure all necessary accessories are
installed.
14
Vitocal 100-AW AM2V Installation, Service and Operating
Intended use presupposes that a permanent
installation in conjunction with permissible
components designed for this purpose has been
carried out. All other use is deemed inappropriate.
Any resulting losses are excluded from the
manufacturer's liability. Any usage beyond
this must be approved by the manufacturer in
each individual case. Intended use also includes
adherence to maintenance and inspection intervals.
System examples with hydronic and electrical
connection schemes and function descriptions are
available to help setting up the heating system,
refer to "Installation Examples" on page 38.
All connections must be fitted with new gaskets/
seals after opening or loosening.
1
WARNING
Risk of electric shock from escaping heating water
or DHW. When commissioning and after carrying
out maintenance work, check all water side
connections for leaks.
1
CAUTION
The indoor unit must be installed in such a way
that the system components are protected from
water (spraying, splashing, etc.) during operation
and service.
Advertisement
Table of Contents
