Head Restraint; Setting Easy Entry/Exit - SMART #1 2023 User Manual

64 Seats and stowage

Head restraint

WARNING Risk of injury due to im-
properly installed or adjusted head
restraint
If the head restraint is not properly in-
stalled or adjusted, it will not provide
the best level of protection.
This increases the risk of head and neck
injuries, such as in an accident or
braking.
► Always drive the vehicle with the
head restraint installed.
► Adjust the head restraint before the
journey and make sure the top of the
head restraint is flush with the top
of your head.
Never exchange the head restraints of the
front seats and the second row seats. Oth-
erwise, the height of the head restraints
can not be adjusted correctly.
1. Adjusting the height of head restraint:
press the button
lower the head restraint.
2. Removing/installing the head restraint:
press the button
time insert a suitable tool into the hole
and push upward to remove the head
restraint. Insert the bars into the guide
sleeve and push down the head re-
straint until it is locked in place.
The removal and installation methods of
front and rear head restraints are the
same.
and push down to
, and at the same

Setting Easy Entry/Exit

WARNING Risk of injury caused by
Easy Entry/Exit
Easy Entry/Exit may cause harm to pas-
sengers in the second row seats
● If there are passengers behind the
driver's seat, the backward move-
ment of the driver's seat may cause
injury after Easy Entry/Exit is
activated.
When Easy Entry/Exit is enabled, the driv-
er's seat is automatically adjusted to facili-
tate entering and exiting the vehicle.
Enter the setting interface:
>
● Tap Vehicle Settings
>
Control Easy Entry/Exit
Easy Entry/Exit (→ Page
After the vehicle is stopped completely
and shifted to park
door and the seat will be adjust to an ap-
propriate position to facilitate exiting the
vehicle.
After Easy Entry/Exit is turned on, lock the
vehicle and the seat will automatically re-
turn to the driving position. Open the door
and the seat will be adjusted to a appro-
priate position to facilitate entering the
vehicle. After getting in and sitting down,
press the brake pedal and the seat will au-
tomatically return to the driving position.
After Easy Entry/Exit is enabled, if
the driver manually adjusts the seat
position when getting in or off the
vehicle this time, Easy Entry/Exit will
no longer be triggered.
>
Vehicle
to turn on/off
152).
, open the driver's