Start Charging - SMART #1 2023 User Manual

92 Vehicle charging
Status
Charging
completed
Malfunctioning
Discharging

Start charging

WARNING Risk of injury due to
charging with damaged charging
equipment
If charging with damaged charging ca-
ble, vehicle charging port or power sup-
ply socket, you could suffer an electric
shock.
► Only use an undamaged charging
cable.
► Avoid mechanical damage that may
be caused by squashing, shearing or
driving over the cable.
► Have a damaged vehicle charging
gun replaced at a smart Authorized
Service Partner as soon as possible.
► Never connect the charging cable to
a damaged vehicle charging port.
NOTE Charging cable heating up
Charging cables may heat up within a
permissible limit during the charging
process.
Observe the permissible limits, so as to
make sure:
● that the power equipment and the
charging cable are not damaged.
● Follow the operating instructions of
charging cable and control device on
the charging cable.
► In case of overheating of the charg-
ing cable or the charging gun cable
plug, have the equipment of the
main power supply checked.
Indicator color
Green
Red
Flashing in blue
NOTE Damaged or contaminated
charging port
► Keep the charging port cover and
socket cap closed when not in use.
The charging port can be protected
against contamination and damage.
► Check and confirm the charging
socket cap is closed properly before
closing the charging port cover. Oth-
erwise, the charging port cover may
be damaged and unable to be
opened again.
Charging requirement:
● The vehicle is in park
● The charging port cover is unlocked
● The drive system is not started.
● The charging cable is not stretched.
Charging with alternating current:
1. Press and open the charging port cover.
2. Remove the charging socket cap
3. Connect the charging gun to the charg-
ing socket , turn on the charging pile
after the charging gun is locked, and the
charging starts with the indicator
flashing in green.
Charging with direct current:
1. Press and open the charging port cover.
2. Remove the charging socket cap
3. Connect the charging gun to the charg-
ing socket and
charging pile after the charging gun is
locked, and the charging starts with the
indicator flashing in green.
When the charging starts, the driver infor-
mation display indicates the battery level
.
.
.
, turn on the