Snom M Series User Guide
Setting up the
Snom M30/M70
Snom M30 Setup
To setup the Snom M30 handset the steps are as follows:
1.
Push the cover of the battery compartment downward to get access to the pull tab
of the battery.
2.
Pull the tab away from the handset at a 90-degree angle until it is free from the
battery.
3.
Slide the cover of the battery compartment back onto the device.
4.
Plug the cable of the charger into the power adapter.
5.
Connect the power adapter.
6.
Place the handset into the charger.
7.
The green LED on the charger will light up, indicating that the handset is charging.
7