Connecting Power Supply To The Control Module - ABB IRC5 Product Manual

2.5.5 Connecting power supply to the control module

Connecting power supply 230V to the control module
The power to the control module can be provided from the drive module with cable
3HAC038835-001 (rolled up inside the drive module at delivery) or from an external
source.
Use this procedure to connect power supply to the control module.
1
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
Action
If using the power supply from the drive
module, roll out the power cable from
the drive module.
© Copyright 2007-2024 ABB. All rights reserved.
2 Installation and commissioning
2.5.5 Connecting power supply to the control module
Note/illustration
PMC small:
D
xx0600003316
PMC large:
D
xx1100000513
• D: 230V power supply from the drive
module to the control module
C A
B
C
A B
Continues on next page
73