Standard Toolkit, Irc5 - ABB IRC5 Product Manual

6.6 Standard toolkit, IRC5

General
All service (repair, maintenance and installation) instructions contain lists of tools
required to perform the specified activity. All special tools, that is, all tools that are
not considered as standard tools as defined below, are listed in their instructions
respectively.
This way, the tools required are the sum of the Standard Toolkit and any tools
listed in the instructions.
Contents, standard toolkit, IRC5
Tool
Screw driver, Torx
Screw driver, Torx
Screw driver, Torx
Ball tipped screw driver, Torx
Screw driver, flat blade
Screw driver, flat blade
Screw driver, flat blade
Screw driver
Box spanner
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: AB
© Copyright 2007-2024 ABB. All rights reserved.
6 Reference information
6.6 Standard toolkit, IRC5
Remark
Tx10
Tx20
Tx25
Tx25
4 mm
8 mm
12 mm
Phillips-1
8 mm
249