Yamaha RX-V2500 Owner's Manual page 60

SYSTEM OPTIONS
Parametric EQ (Parametric equalizer)
Use this feature to adjust the PEQ for any speaker.
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Audio Option
1
Press k / n to select Test Tone or the speaker
you want to adjust.
• Test Tone turns on or off the test tone output
when adjusting the tonal quality of each speaker.
• Front L adjusts the tonal quality of the front left
speaker.
• Front R adjusts the tonal quality of the front right
speaker.
• Center adjusts the tonal quality of the center
speaker.
• Surround L adjusts the tonal quality of the
surround left speaker.
• Surround R adjusts the tonal quality of the
surround right speaker.
• Surround Back L adjusts the tonal quality of the
surround back left speaker.
• Surround Back R adjusts the tonal quality of the
surround back right speaker.
• Presence L adjusts the tonal quality of the
presence left speaker.
• Presence R adjusts the tonal quality of the
presence right speaker.
2
Press h to access the settings window.
Test Tone
Front L
Front R
Center
3
Press l / h to select PARAM, then press
ENTER to select a parameter from Band
(band), Freq (frequency) or Q (Q factor).
56
Test Tone
Front L
Front R
PARAM RESET
EDIT EXIT
Band / Gain
4
Press n EDIT and press ENTER to access the
edit window.
Test Tone
Front L
Front R
Center
The parameter selected in PARAM is highlighted.
• Press l / h to adjust the parameter.
• Press k / n to adjust the Gain.
• Press ENTER to exit the edit window.
5
Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all PEQ parameter settings for the
selected speaker, select RESET and press ENTER.
6
Select EXIT and press ENTER to exit the
settings window.
y
• If you select "Band" in step 3, you can use this menu as a
graphic equalizer.
• For more information on the parametric equalizer, see
"PARAMETRIC EQUALIZER INFORMATION" on page 101.
Tone Control (Tone control)
Use to adjust the amount of bass and treble output to your
speakers and headphones.
Manual Setup > Sound > Tone Control >
Control (Tone control)
Choices: Defeat, Speaker, Headphone
Control
Bass
Treble
• Select "Defeat" if you do not want to make any
adjustments.
• Select "Speaker" to adjust the bass/treble balance of
your speakers.
• Select "Headphone" to adjust the bass/treble balance of
your headphones.
Band #1
Gain 0.0dB
Freq. 125.0Hz
Q 1.000
Defeat
Speaker
Headphone