Starting The Setup - Yamaha RX-V2500 Owner's Manual

Starting the setup

For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
VOLUME
MIN MAX
Subwoofer
1
Switch on this unit and video monitor.
2
Set AMP/SOURCE/TV to AMP, then press
TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
3
Press k/n repeatedly to select Auto Setup,
then press h.
ENTER
Input Select
Manual Setup
Auto Setup
System Memory
Audio Info.
CROSSOVER/
HIGH CUT
MIN MAX
TOP
TITLE
Sound
Basic
Option
ENTER
Information
Setup Menu
Setup Type
Start
4
Press k/n repeatedly to select Setup Menu,
then press h.
Information
Setup Menu
Setup Type
Start
5
Press k/n repeatedly to select Wiring,
Distance, Size, Equalizing or Level, then
press h.
Skip
Wiring Check
Distance
Size
Wiring
Distance Skip
Check
Size
Equalizing
Level
Size
Equalizing
Level
6
For Wiring, Distance, Size or Level, select:
Check To automatically check and adjust the selected
item.
Skip To skip the selected item and perform no
adjustments.
y
When using THX speakers, select Skip for Size and make
sure that "Small" or "Small x2" is selected in Speaker Set
(page 58) and that "80Hz (THX)" is selected in Bass Cross
Over (page 60).
AUTO SETUP
Wiring
Distance
Size
Wiring Skip
Distance Check
Size
Equalizing
Distance
Size Skip
Check: Natural
Equalizing
Level
Check: Flat
Check: Front
Skip
Check
27