Table of Contents
Advertisement
To Adjust Occupancy Settings
See Table 4 for a list of occupancy settings and specifications.
Table 4 — Occupancy Settings
SETTING
SET OCC FAN—Operates the fan in AUTO or
ON during occupied periods
NOTE: If the installer configured the thermostat
for non-programmable operation and remote
occupancy is disabled, this setting is not
available.
REMINDER! The AUTO setting is a violation of
ASHRAE 90.1 and Title 24 but is a feature of the
thermostat for building owners that mandate auto
fan operation during occupied periods for energy
conservation purposes.
SET UNOC FAN—Operates the fan in AUTO or
ON during unoccupied periods
NOTE: If the installer has configured the
thermostat for non-programmable operation and
remote occupancy is disabled, this setting is not
available.
UNOCC COOL—The cool setpoint during
unoccupied periods
NOTES:
• The minimum value you can set is limited by
the unoccupied heat setpoint (cool setpoint
cannot be less than the heat setpoint) and the
installer setting for MIN COOL SETPOINT.
• If the installer has configured the thermostat for
non-programmable operation and remote
occupancy is disabled, this setting is not
available.
UNOCC HEAT—The heat setpoint during
unoccupied periods
NOTES:
• The maximum value is limited by the
unoccupied cool setpoint (heat setpoint cannot
be greater than the cool setpoint) and the
installer setting for MAX HEAT SETPOINT.
• If the installer has configured the thermostat for
non-programmable operation and remote
occupancy is disabled, this setting is not
available.
OCC COOL—The cool setpoint during occupied
periods
NOTES:
• The minimum value is limited by the occupied
heat setpoint (cool setpoint cannot be less than
the heat setpoint) and the installer setting for MIN
COOL SETPOINT.
• If the installer has configured the thermostat for
non-programmable operation and remote
occupancy is disabled, this setting is not
available.
SETTING
OCC HEAT—The heat setpoint during occupied
periods
NOTES:
• The maximum value is limited by the occupied
DEFAULT/RANGE
cool setpoint (heat setpoint cannot be greater
D:
Auto
than the cool setpoint) and the installer setting
R:
Auto
for MAX HEAT SETPOINT.
On
• If the installer has configured the thermostat for
non-programmable operation and remote
occupancy is disabled, this setting is not
available.
DAY PARTS—The number of programmable
periods in a single day. The setting is adjustable
as either 2 (default) or 4 periods in a day.
Typically, commercial or light commercial
products use 2.
D:
Auto
NOTE: If the installer has configured the
R:
Auto
thermostat for non-programmable operation and
On
remote occupancy is disabled, this setting is not
available.
PROGRAM SCHEDULE—The program schedule specifies the
programmed start times for the thermostat to control the space to the
D:
85° F
occupied or unoccupied fan and setpoint values.
R:
52° to 90° F
•
D:
62° F
R:
50° to 88° F
•
D:
75° F
R:
52° to 90° F
NOTES:
•
•
•
•
11
Table 4 — Occupancy Settings (cont)
From the SET PROGRAM screen, press SELECT to view the
program schedule for SUNDAY P1.
From the SUNDAY P1 screen, use the up and down arrows to
advance through the program schedule to the next period
(SUNDAY P2), or press SELECT again to change the start time or
occupancy setting.
BACK returns to the menu
Use up and down arrows to change start time
Use OCC/UNOCC to change occupancy
The bottom middle button is labeled the opposite of the current
occupancy selection
DEFAULT/RANGE
D:
70° F
R:
50° to 88° F
D:
2
R:
2 or 4
Advertisement
Table of Contents
