Siemens SIMATIC MICRO-DRIVE PDC600 Equipment Manual page 16

Product overview
2.2 Properties
Property
Braking resistor
Connection of external braking resistor
(X5051)
Hardware STO
PROFINET
PROFINET interface with two ports
(X2050 Port 1, X2060 Port 2).
The PDC600F has the additional technical properties:
Property
PROFIsafe
STO (Safe Torque Off)
SS1 (Safe Stop 1)
SSM (Safe Speed Monitor)
SLS (Safely Limited Speed)
Accessories
You can find information on the topic of "Accessories/spare parts" in the System Manual SIMATIC
MICRO-DRIVE Drive controller PDC
109797859).
14
Description
The PDC600 has no internal braking re‐
sistor. To absorb the regenerative energy
of the motor, you must connect an ex‐
ternal braking resistor or switch on the
energy recovery in the drive controller
(see p0205).
The connection terminal (X5051) for an
external braking resistor is designed for
an average current of
15 A.
Safety function "Hardware STO" (Safe
Torque Off)
Safe torque off via onboard terminal
(STO+ and STO-)
You connect PROFINET IO via the RJ45
bus connector.
Description
Fail-safe communication via PROFINET
for controlling and evaluating the safety
functions of the drive controller.
Stop function for safe torque shutdown
according to stop category 0 according
to EN 60204-1
Stop function according to Stop Catego‐
ry 1 according to EN 60204-1 (time-
monitored)
Safety speed monitoring according to
IEC/EN 61800-5-2
Safely limited speed according to IEC/EN
61800-5-2
(https://support.industry.siemens.com/cs/ww/en/view/
Additional information
System Manual SIMATIC MICRO-DRIVE
drive controller PDC (https://
support.industry.siemens.com/cs/ww/e
n/view/109797859)
System Manual SIMATIC MICRO-DRIVE
drive controller PDC (https://
support.industry.siemens.com/cs/ww/e
n/view/109797859)
Additional information
System Manual SIMATIC MICRO-DRIVE
drive controller PDC (https://
support.industry.siemens.com/cs/ww/e
n/view/109797859)
Equipment Manual, 12/2023, A5E50502703-AB
PDC600(F)