Table of Contents
Advertisement
Available languages
Available languages
will begin counting down.
will begin counting down.
DELAY
the selected wash cycle will be increased.
the selected wash cycle will be increased.
ENGLISH
ENGLISH
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
will begin counting down.
will begin counting down.
DELAY
DELAY
ENGLISH
ENGLISH
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
FRANÇAIS
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
«h» switches off.
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
ENGLISH
DELAY
will begin counting down.
DELAY
will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
«h» switches off.
«h» switches off.
Tableau des programmes
DELAY
DELAY
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
will begin counting down.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
appears on the display; each time you press the button,
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
«h» switches off.
«h» switches off.
To adjust the delay time and select a shorter period of time,
will begin counting down.
will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
Program
Program
Programme
appears on the display; each time you press the button,
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
repeatedly until the selected delayed start indicator light
of time between 1 and 12 hours.
switches off and the wash cycle begins.
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
Program
Program
Eco
has been started.
Eco
1
1
1 Eco
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
switches off and the wash cycle begins.
«h» switches off.
«h» switches off.
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Conventional
Conventional
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
2
2
Program
Program
has been started.
Eco
has been started.
Eco
1
1
2 Auto
wash and dry
wash and dry
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
will begin counting down.
To adjust the delay time and select a shorter period of time,
«h» switches off.
To adjust the delay time and select a shorter period of time,
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
Intensive
Intensive
3
3
2
2
Program
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
has been started.
repeatedly until the selected delayed start indicator light
wash and dry
wash and dry
1
Eco
1
Eco
3 Intensif
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
Fast
Fast
4
4
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Intensive
Intensive
3
Conventional
3
Conventional
4 Lavage rapide
Program
Program
repeatedly until the selected delayed start indicator light
has been started.
has been started.
2
2
Eco
1
wash and dry
wash and dry
30'
«h» switches off.
Sanitizing
Sanitizing
5
5
The DELAY function cannot be set once a wash cycle
Fast
Fast
4
4
5 Lavage et
Conventional
Intensive
Intensive
3
3
has been started.
2
Program
Program
Eco
Eco
1
1
séchage
wash and dry
Pre-Wash
Pre-Wash
6
6
rapides
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
Conventional
Conventional
3
Intensive
Program
Program
2
2
Eco
Eco
1
1
6 Verre
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
4
Conventional
Conventional
Program
Intensive
Intensive
3
3
2
2
Eco
Eco
7 Silencieux
1
1
wash and dry
wash and dry
7
Self-Clean
7
Self-Clean
Pre-Wash
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
5
Fast
Fast
4
4
Conventional
Conventional
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Intensive
Intensive
3
3
2
2
Eco
1
8 Stérilisation
wash and dry
wash and dry
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Sanitizing
Sanitizing
5
5
Conventional
4
Fast
4
Fast
Intensive
Intensive
3
3
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
2
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
9 Prélavage
wash and dry
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
Self-Clean
7
Pre-Wash
Pre-Wash
6
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
Intensive
3
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
10 Auto-nettoyage
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Sanitizing
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Sanitizing
5
5
Les données du programme Éco sont mesurées sous des conditions en laboratoire conformément à la norme européenne EN 60436:2020.
Pre-treatment of the dishes is not needed before any of the programs.
Fast
Pre-treatment of the dishes is not needed before any of the programs.
4
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note pour les laboratoires d'essais : Pour obtenir des informations sur les conditions de tests comparatifs EN, merci d'envoyer un courriel à
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
l'adresse suivante : dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
5
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Aucun prétraitement de la vaisselle n'est nécessaire avant l'un quelconque des programmes.
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Les options ne peuvent pas toutes être utilisées en même temps.
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
**) Les valeurs indiquées pour des programmes différents du programme éco sont fournies à titre indicatif uniquement. Le temps réel peut
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
6
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
varier selon des facteurs comme la température et la pression de l'eau, la température de la pièce, la quantité de détergent, la quantité et le
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
type de vaisselle, l'équilibre de la charge, les options supplémentaires sélectionnées, et la calibration du capteur.
Self-Clean
7
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. ECO - Le programme Éco est adapté pour nettoyer de la vaisselle normalement sale, et pour cette utilisation, il est le programme
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
le plus efficace en termes de consommation d'énergie et d'eau combinée, et il est utilisé pour évaluer la conformité à la législation
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
européenne en matière d'éco-conception.
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
2. Auto - Pour la vaisselle normalement sale avec des résidus de nourriture secs. Détermine le degré de saleté de la vaisselle et règle le
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
programme en fonction de celui-ci. Lorsque le capteur détecte le degré de saleté, une animation apparaît sur l'afficheur et la durée
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
du cycle est mise à jour.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
3. INTENSIF - Programme conseillé pour la vaisselle très sale, surtout les poêles et les casseroles (ne pas utiliser pour la vaisselle délicate).
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
4. LAVAGE RAPIDE 30' - Programme à utiliser pour la demi-charge de vaisselle légèrement sale sans résidus alimentaires séchés.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
N'inclut pas de phase de séchage.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. LAVAGE ET SÉCHAGE RAPIDES - Vaisselle normalement sale. Cycle quotidien, assure un rendement de nettoyage optimal et des
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
performances de séchage en moins de temps..
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
6. VERRE - Programme pour vaisselle délicate, plus sensible aux températures élevées, comme les verres et les tasses.
PROGRAMS DESCRIPTION
7. SILENCIEUX - Adéquat lorsque l'appareil fonctionne la nuit. Assure un nettoyage et des performances de séchage optimaux avec les
plus faibles émissions de bruit.
8. STÉRILISATION - Programme pour vaisselle normalement ou très sale avec étape supplémentaire de lavage antibactérien . Peut être
utilisé pour effectuer l'entretien du lave-vaisselle.
9. PRÉLAVAGE - Utilisé pour rincer la vaisselle qui doit être lavée ultérieurement. N'utilisez pas de détergent avec ce programme.
10. AUTO-NETTOYAGE -Programme à utiliser pour effectuer l'entretien du lave-vaisselle, à réaliser uniquement lorsque le lave-vaisselle
est VIDE en utilisant des détergents spécifiques conçus pour l'entretien du lave-vaisselle.
Modifier un programme en cours
Si vous avez sélectionné le mauvais programme, vous pouvez le changer si c'est fait au début du cycle : ouvrir la porte, appuyer sur le bouton
« MARCHE/ARRÊT » et le maintenir enfoncé, la machine s'éteindra. Rallumez l'appareil en appuyant sur la touche MARCHE/ARRÊT et sélectionnez
le nouveau cycle de lavage et les options désirées ; Lancez le cycle de lavage en appuyant sur le bouton « START/Pause » et en fermant la porte
dans les 4 sec. Si cela prend plus de 4 secondes, l'appareil se met automatiquement en pause et vous devez redémarrer l'appareil en répétant la
dernière opération.
Ajouter de la vaisselle
Sans éteindre l'appareil, ouvrez la porte (le voyant DÉPART/Pause commence à clignoter) (attention à la vapeur CHAUDE !) et placez la vaisselle à
l'intérieur du lave-vaisselle. Appuyer sur le bouton MARCHE/Pause et fermer la porte dans les 4 sec, le cycle reprendra à l'endroit où il a été interrompu.
Interruptions imprévues
Si la porte est ouverte durant le cycle de lavage, ou s'il y a une panne de courant, le cycle s'interrompt. Appuyer sur le bouton MARCHE/Pause et
fermer la porte dans les 4 sec, le cycle reprendra à l'endroit où il a été interrompu.
Available
options
disponibles (*)
Available
50°
50°
50°
options
Available
55°
55°
50°
50°
50 - 60°
options
65°
65°
-
-
55°
55°
50°
50°
65°
-
-
50°
50°
-
-
65°
65°
-
-
Available
55°
55°
50°
50°
-
options
65°
65°
-
-
-
-
50°
50°
-
-
Available
65°
65°
-
-
55°
50°
50°
50°
options
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
Available
65°
-
55°
55°
options
50°
50°
45°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
Available
50°
-
65°
65°
-
-
55°
55°
options
50°
50°
50°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
55°
50°
65°
-
-
-
65°
65°
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
-
-
-
-
65°
-
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
50°
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
65°
65°
-
-
-
-
-
-
65°
-
NaturalDry
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
E
E
d
d
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
– enabled
– enabled
– disabled
– disabled
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
press and hold
press and hold
button (3 sec).
button (3 sec).
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
E
E
d
d
– enabled
– enabled
– disabled
– disabled
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
press and hold
As additional steam protection, special designed protection foil is
press and hold
button (3 sec).
button (3 sec).
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
NaturalDry
E
E
d
d
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
Duration of
Duration of
– enabled
– enabled
– disabled
– disabled
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
Durée du
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
Available
wash pro-
wash pro-
Fonctions
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
consumption
programme de
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
press and hold
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
options
gram
gram
*)
*)
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
(litres/cycle)
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
lavage (h:min)**)
E
d
– enabled
– disabled
Duration of
(h:min)
Duration of
(h:min)
button (6 sec).
button (6 sec).
**)
**)
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Available
wash pro-
wash pro-
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
consumption
press and hold
button (3 sec).
2:45
2:45
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
3:10
options
gram
gram
*)
*)
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
(litres/cycle)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
(h:min)
(h:min)
Duration of
Duration of
**)
**)
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
Available
NaturalDry functionality could be disabled by the user as follows:
wash pro-
wash pro-
2:00
2:00
press and hold
press and hold
button (3 sec).
button (3 sec).
consumption
2:45
2:45
1:25 - 3:00
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
options
gram
gram
*)
*)
(litres/cycle)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
button (6 sec).
Duration of
(h:min)
(h:min)
**)
**)
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
Available
2:30
wash pro-
2:30
2:00
2:00
press and hold
status of NaturalDry functionality by pressing
press and hold
status of NaturalDry functionality by pressing
button (3 sec).
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
options
2:45
gram
2:45
*)
2:50
E
E
d
d
button (6 sec).
– enabled
– enabled
– disabled
– disabled
Duration of
Duration of
(h:min)
**)
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
0:55
0:55
Available
wash pro-
2:30
wash pro-
2:30
press and hold
status of NaturalDry functionality by pressing
press and hold
button (3 sec).
button (3 sec).
consumption
2:00
2:00
2:45
0:30
options
gram
gram
*)
*)
E
d
– enabled
– disabled
(litres/cycle)
Duration of
(h:min)
Duration of
(h:min)
1:40
**)
1:40
**)
To confirm the change and exit from the Control Menu please
0:55
0:55
Available
wash pro-
wash pro-
press and hold
button (3 sec).
2:30
2:30
2:00
consumption
2:45
2:45
1:25
options
gram
gram
*)
*)
(litres/cycle)
0:10
0:10
Duration of
Duration of
(h:min)
(h:min)
1:40
1:40
**)
**)
Available
wash pro-
0:55
wash pro-
0:55
2:30
consumption
2:00
2:00
options
gram
gram
*)
*)
2:45
2:45
1:40
0:50
0:50
(litres/cycle)
Duration of
0:10
0:10
(h:min)
(h:min)
**)
**)
1:40
1:40
wash pro-
0:55
consumption
2:30
2:30
gram
2:00
2:00
*)
2:45
2:45
3:30
(litres/cycle)
0:50
0:50
(h:min)
**)
0:10
0:10
1:40
0:55
0:55
2:30
2:30
2:00
2:00
2:45
1:40
0:50
0:50
0:10
1:40
1:40
0:55
0:55
2:30
2:30
2:00
0:12
0:50
0:10
0:10
1:40
1:40
0:55
0:55
2:30
0:50
0:50
0:50
0:10
0:10
1:40
1:40
0:55
0:50
0:50
0:10
0:10
1:40
0:50
0:50
0:10
0:50
9
9
9
9
button:
button:
9
button:
button:
button:
button:
Water
Water
Consommation
Energy
Energy
Consommation
consumption
consumption
consumption
d'eau
button:
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
(litres/cycle)
Water
Water
Energy
Energy
consumption
consumption
consumption
12.0
12.0
0.92
0.92
button:
9,5
button:
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
15.0
15.0
1.35
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
7,0 - 14,0
button:
button:
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
consumption
consumption
button:
button:
12.0
12.0
0.92
0.92
14,0
(litres/cycle)
(kWh/cycle)
Water
11.5
Water
11.5
Energy
1.10
Energy
1.10
15.0
15.0
1.50
1.50
button:
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
0.92
9,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
11.5
11.5
1.30
1.30
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
15.0
1.50
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
11,5
8.0
8.0
0.80
0.80
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
4.5
4.5
0.01
0.01
Water
Energy
11.5
11.5
1.30
1.30
11.5
1.10
consumption
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
15,0
(kWh/cycle)
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
0.92
10,0
8.0
8.0
0.80
0.80
4.5
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
4,5
8.0
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
1.50
8,0
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
1.10
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
8.0
8.0
0.80
0.80
4.5
0.01
8.0
0.80
42
d'énergie
(kWh/cycle)
0,85
0.90 - 1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0,85
Advertisement
Chapters
Table of Contents
