Installing The Fix-028 Table Mount - Glorystar NEBULA NEB156 User Manual

Installing the FIX-028 Table Mount

To install the FIX-028 table mount to the display, follow these steps:
1. Disconnect the AC power adaptor from the power source to turn off the
display.
2. Pull up the stand from the base and the VESA plate from the stand.
3. Lay the display face down on a flat surface.
CAUTION: Always use a soft material, cloth or foam, to protect the display
when placing the screen face down.
4. Mount the VESA plate at the back of the display. Secure the VESA plate with
four M4x12 bolts and washers.
5. Set the display in an upright position.
6. Connect the AC power adaptor into a power source to turn on the display.
18