Page 1
The Tauri temperature-check tablets should only be used to detect variations in surface temperature. In the event that an elevated skin temperature is detected, the subject should be advised to check temperature with an approved medical thermometer and the finding confirmed.
2. Stand installation Installation Example - TAURI101 with FIX028 Small Size Mounting 1. Small size mount. 2. Move the arm in vertical direction. 3. Insert four screws at the back. 4. Release the DC lock in TAURI 10.
Page 5
5. Connect DC power. 6. Return and Lock the DC cover. Installation Example - TAURI156 with Wall Mount. 1. Wall mount for all size. 2. Install the plate with track on wall.
Page 6
3. Install the other plate on device. 4. Hang the device from up to down on wall. Installation Example - TAURI215 with FIX 030 All size Mounting 1. Follow the 2. Insert four screws at 3. Finished. instruction inside the back. FIX030 packaging to set up the stand.
3. Wi-Fi connection Wi-fi before starting set-up Please connect 3.1 Press “I agree” and start software setup. Please wait for 5-10 seconds for the initiation of the camera. 3.2 Press and hold on screen for 5 seconds and enter “0000” to access into settings. Then select “system settings”...
6. Scheduled On / Off 6.1 Press bottom right corner 5 times and enter”0000” to access StarOS. 6.2 Select “SCHEDULED ON/OFF”. 6.3 “Turn off” the schedule to modify the content. 6.4 “Turn on” the schedule to confirm and apply the setting.
8. Power button 8.1 Press once to turn into sleep mode, touch screen to open. 8.2 Press 1.5 second to pop-up notice for switching off the device. 7.3 Press 10 seconds to restart the device.