Table of Contents
Advertisement
In the event of a fault |
Trouble shooting list
* Check that all seals, seams and connections are
watertight.
Check the following before calling a repairman:
Is the water tap or stopcock on?
Is the dishwasher plugged in?
Has the fuse blown? (Check the fuse in electrical plug).
* Water not discharged at end of cycle
Did you open the door before the light went out and
the cycle ended?
Are the strainers/filters clogged?
Is the discharge hose blocked?
¢ Dishes not washed satisfactorily
Has anything prevented the spray arm from rotating?
Were the dishes packed too close together?
Did you use enough detergent?
(Correct amount: about 1-2 tablespoons/load)
Clean the strainers/ilters!
Check that the rinse conditioner dispenser is not empty.
Check that the spray arm holes are not clogged.
* Are the strainers/filters fitted correctly in place?
* Dishes dull or streaky
Limescale from hard water has probably formed in
the machine and is being deposited on the dishes.
Buy a limescale remover and follow the instructions
on the package to descale the dishwasher.
LN Never attempt to repair the dishwasher yourself.
Repairs carried our by unauthorised or inexperienced
persons can cause injury or other machine faults.
Advertisement
Table of Contents
