Winmate M101AD User Manual page 27

2. Select the desire scanning mode from the drop-down menu shown as below.
3. After selecting a desire scanning mode, click on the Save to Device on the side bar.
Scanning mode
When in manual trigger mode, the scanner scans until a bar code is read or until
the trigger is released. Two modes are available, Normal and Enhanced. Normal
mode offers good scan speed and the longest working ranges (depth of field).
Manual Trigger
Enhanced mode will give you the highest possible scan speed but slightly less
range than Normal mode. Enhanced mode is best used when you require a fast
speed and don't require a long working range. Default = Manual Trigger-Normal.
Presentation Mode uses ambient light and scan engine illumination to detect bar
codes. When in Presentation Mode, the LEDs remain dim until a bar code is
Presentation
presented to the scan engine, then the aimer turns on, and the LEDs turn up to
Mode
read the code. If the light level in the room is not high enough, Presentation Mode
may not work properly.
When in Streaming Presentation mode, the scan engine's aimer goes out after a
Streaming
short time, but the scan illumination remains on all the time to continuously search
Presentation
Mode
for bar codes. Two modes are available, Normal and Enhanced. Normal mode
Chapter 4: Operating the Device
Description
26