Delta 25201 RBAV5 Assembly Instructions Manual page 6

PULL
6
• Turn the assembly upright.
• Check to be sure the legs are secure. While gently holding the base
down, pull up on the legs. They should remain assembled to the bases.
7
• Rotate the bases of the frame down.
• Place the frame onto the top of the legs. Align the holes in the bases
of the frame with the holes in the legs.
Note:
Do not remove the foam around top of frame.
Customer Service
Tel. (800) 377-3777
Bassinet Assembly
PULL
Frame
Legs
M6 x 4cm Screws
8
• Insert four M6 x 4cm screws through the holes in the frame and legs.
M6 Lock Nuts
9
• Attach an M6 nut to the end of each screw. Make sure the rounded side
of the lock nuts face down. Hand-tighten the lock nuts onto the screws.
6
M6 x 4cm Screws
M6 Lock Nuts
Rounded Side
www.DeltaChildrensProducts.com