Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Delta Manuals
  4. Baby & Toddler Furniture
  5. Mission 7532
  6. Manual

Delta Mission 7532 Manual

Changer with casters
Hide thumbs

Advertisement

Quick Links

Download this manual
Mission Changer with Casters
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
STYLE No: 7532
When contacting Delta Consumer Care you
will need to reference the above number.
www.deltachildrensproducts.com
To register your product for important safety alerts and updates to your product
please visit www.deltachildrensproducts.com and click on Product Registration.
SEPTEMBER 3, 2010
7532-R0
Consumer Care:
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
READ ALL INSTRUCTIONS BEFORE
ASSEMBLY AND USE.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
!
DUE TO THE PRESENCE OF SMALL PARTS
DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
COLOR
A
REV
FTY
Conforms to
ASTM F2388
Safety Standards
©2010 DELTA ENTERPRISE CORP.

Advertisement

loading

Related Manuals for Delta Mission 7532

Summary of Contents for Delta Mission 7532

  • Page 1 CHILDREN UNTIL ASSEMBLY IS COMPLETE. Mission Changer with Casters THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. STYLE No: 7532 COLOR When contacting Delta Consumer Care you will need to reference the above number. Consumer Care: www.deltachildrensproducts.com Delta Children’s Products...

  • Page 2: Notes On Assembly

    - Do not scratch or chip the finish. - Inspect the product periodically, contact delta children's products for replacement parts or questions. - Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement.
  • Page 3 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. B. RIGHT END FRAME x 1 C. TOP RAIL x 2 D. BACK RAIL MID x 1 A. LEFT END FRAME x 1 E. FRONT RAIL TOP x 1 H. TOP SHELF x 1 F.

  • Page 4: Hardware And Tools

    P A R TS: HARDWARE AND TOOLS Required Tools M. M6 x 50 mm BOLT x 16 Phillips Screwdriver N. M6 x40 mm BOLT x 6 Pliers or Adjustable Wrench Required for Assembly (not supplied) P. Φ4x30 mm METAL PIN x 8 R.
  • Page 5 SECTION 1: CHANGING TABLE ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP D. BACK RAIL MID x 1 F. FRONT RAIL M. M6 x 50 mm BOLT x 8 MID x 1 P. Φ4x30 mm METAL PIN x 2 M4 ALLEN E.
  • Page 6 SECTION 1: CHANGING TABLE ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP H. TOP SHELF x 1 J. LOWER SHELF x 2 FROM STEP 1 LAY THE LEFT END FRAME ON THE FLOOR, RAILS UP. SLIDE THE TOP SHELF (PART H) IN THE GROOVES ON THE FRONT RAIL MID AND BACK RAIL MID, INTO THE GROOVE ON THE LEFT END FRAME, SLIDE (2) LOWER SHELVES (PART J) IN THE GROOVES ON THE LOWER RAILS, INTO THE GROOVES ON THE LEFT END FRAME AS SHOWN.
  • Page 7 SECTION 1: CHANGING TABLE ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP B. RIGHT END FRAME x 1 FROM STEP 2 M. M6 x 50 mm BOLT x 8 P. Φ4x30 mm METAL PIN x 2 M4 ALLEN WRENCH SUPPLIED ATTACH (1) RIGHT END FRAME (PART B) TO THE ASSEMBLY FROM STEP 2 WITH (2) Φ4x30 mm METAL PINS (PART P) AND (8) M6x50 mm BOLTS (PART M) USING THE M4 ALLEN...
  • Page 8 SECTION 1: CHANGING TABLE ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 3 T. SHELF BRACE x 1 U. 15mm SCREW x 2 ATTACH (1) SHELF BRACE (PART T) TO THE RAILS USING (2) 15mm SCREWS (PART U). TIGHTEN WITH THE PHILLIPS SCREWDRIVER.
  • Page 9 SECTION 1: CHANGING TABLE ASSEMBLY STEP 5 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 4 C. TOP RAIL x 2 N. M6 x40 mm BOLT x 4 P. Φ4x30 mm METAL PIN x 4 M4 ALLEN WRENCH SUPPLIED ATTACH (2) TOP RAILS (PART C) TO THE ASSEMBLY FROM STEP 4 WITH (4) Φ4x30 mm METAL PINS (PART P) AND (4) M6x40 mm BOLTS (PART N) USING THE M4 ALLEN WRENCH AS SHOWN.
  • Page 10 SECTION 1: CHANGING TABLE ASSEMBLY STEP 6 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 5 V. CASTER x 2 W. LOCKING CASTER x 2 INSERT (2) CASTERS (PART V) AND (2) LOCKING CASTERS (PART W) AS SHOWN. IMPORTANT: MAKE SURE TO PUT THE LOCKING CASTERS ON THE FRONT OF THE CHANGER.
  • Page 11 SECTION 1: CHANGING TABLE ASSEMBLY STEP 7 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 6 N. M6 x40 mm BOLT x 2 R. NYLON WASHER x 4 S. NUT x 2 M4 ALLEN WRENCH SUPPLIED L. RESTRAINT HARNESS x 1 ALIGN THE HOLE IN THE END OF THE STRAP OF THE RESTRAINT HARNESS (PART L) WITH THE HOLE IN THE TOP SHELF.
  • Page 12 SECTION 1: CHANGING TABLE ASSEMBLY STEP 8 PARTS AND TOOLS REQUIRED TO COMPLETE STEP K. FOAM PAD x 1 FROM STEP 7 PLACE THE FOAM PAD (PART K) ONTO THE TOP SHELF(PART H) ON TOP OF THE ATTACHED STRAP FROM STEP 7 AS SHOWN.
  • Page 13 SECTION 1: CHANGING TABLE ASSEMBLY FINAL RESTRAINT HARNESS SYSTEM USE: . PLACE THE INFANT ON THE CHANGING TABLE FOAM PAD. . POSITION THE RESTRAINT HARNESS OVER THE MIDDLE OF THE INFANT’S TORSO AND INSERT THE BUCKLED ENDS INTO EACH OTHER UNTIL THE LOCK SHUT WITH A CLICK.
  • Page 14 Delta. To register your product for important safety alerts and updates to your product please visit http://deltaenterprise.com/register.asp...