The Track Indicators; Track Delete; Recording & Effects - Yamaha PortaTone PSR-4000 Owner's Manual

Song Playback & Recording

THE TRACK INDICATORS

The track indicators above the track mode selec-
tors indicate which tracks contain data and which
are muted. Tracks which do not contain data are
indicated by a dotted circle outline while tracks
which contain data have a solid outline. Play-ena-
bled tracks are indicated by a filled circle while
tracks that are muted are indicated by an outline
only.

TRACK DELETE

When the
will appear for tracks which contain data. Select
via the
controls while holding the
data in the corresponding tracks. The data is actu-
ally deleted when the
When the
will automatically be switched to
.
RECORDING & EFFECTS
The reverb, chorus, and DSP effects are recorded
as follows:
REVERB
CHORUS
DSP EFFECT
62
...................................................................................................................................................
............................................................................................................................................................................
LCD button is pressed
through LCD [ / ]
button to delete all
LCD button is released.
LCD button is pressed, tracks set to
...................................................................................................................................................
The last reverb type selected during recording takes priority. No effect type is recorded if the [RE-
VERB] button is off during recording.
The chorus type is only recorded when the accompaniment or rhythm tracks are recorded. The
chorus type is recorded even if the [CHORUS] button is off during recording. The chorus type is
selected automatically according to the selected style.
If the [DSP EFFECT] button is on during recording, the current DSP effect will be recorded only for
the tracks actually being recorded. If the [DSP EFFECT] button is off during recording or only the
accompaniment tracks are set to the REC mode, no change occurs. If the [DSP EFFECT] button is
turned on during manual track recording, however, only tracks set to the REC mode are effected.
Record-enabled
or
No data Muted
Play-enabled