Yamaha PortaTone PSR-4000 Owner's Manual page 101

When the source song has been selected press the
LCD button and use the
LCD [ / ] controls to select the destination disk.
Select " " to copy to a different floppy
disk, or "
floppy disk.
Press the LCD button to begin the
copy operation. At this point the display shown
below will appear and you will have a chance to
change the song name before it is copied.
If you want to give the file to be copied an
original file name, be sure to do so before pressing
the LCD button. File names can be up to 12
characters long. Use the < > LCD [ / ] control to
move the name cursor to the various character posi-
tions, then use the or
control to select the required character for each
position. The LCD [ / ] control selects capi-
tal letters and the
selects numbers and special characters.
When you're ready to execute the copy operation
press the LCD button (or press the
button to cancel the operation). "Don't remove disk"
will appear while the data is being copied. If you're
copying to a different floppy disk the PSR-4000 will
prompt when to insert the copy destination disk.
Follow the on-screen instructions.
" to copy to the same
LCD [ / ]
LCD [ / ] control
LCD
Disk Operations
97