Note, Control Change, Pro- Gram Change, & Pitch Bend Switch - Yamaha PortaTone PSR-4000 Owner's Manual

OFF No data will be transmitted on the selected channel.
RIGHT 1
RIGHT 2
Only data corresponding to the specified voice will be transmitted on the selected channel.
LEAD
LEFT
HARMONY 1
The Harmony feature (page 33) produces a maximum of three harmony notes. These settings
HARMONY 2
correspond to each of the harmony notes.
HARMONY 3
MULTI PAD 1
Multi pad phrases from the corresponding pad are transmitted via the selected channel. When a
MULTI PAD 2
pad is played in the PERCUSSION mode, however, the data is transmitted on the channel to
MULTI PAD 3
which MULTI PAD 1 is assigned.
MULTI PAD 4
CHORD pad data is transmitted as note data on the channels to which the appropriate accom-
paniment parts are assigned (RHY 1 ... ACCOMP PHRASE2).
ACCOMP RHY 1
ACCOMP RHY 2
ACCOMP BASS
ACCOMP CHORD 1
The specified accompaniment part is transmitted via the selected channel.
ACCOMP CHORD 2
ACCOMP PAD
ACCOMP PHRASE1
ACCOMP PHRASE2
NOTE, CONTROL CHANGE,
PROGRAM CHANGE, & PITCH BEND
SWITCH
These "switches" turn transmission of the speci-
fied data type on or off. Use the
, and LCD [ / ] controls to
turn transmission of the corresponding data on or
off. A check mark appears in the appropriate box
when the corresponding switch is turned on.
NOTE This switch turns transmission of the note data on or off. When off, no notes will be produced by an
external instrument or tone generator even when the voice or part assigned to the selected channel is
played. Note transmission can be turned off, for example, you only want the external device to respond
to program change numbers, changing the selected voice without actually playing it.
CNTCNG Turns transmission of control change data on or off. Control change data includes modulation wheel,
foot controller, and any other controller data (except the pitch bend wheel, which has its own switch,
below).
PRGCNG Turns transmission of program change data on or off. Program change data corresponds to voice or
"patch" numbers, and is used to select the corresponding voices on an external MIDI device.
PITCHBND Turns transmission of pitch bend wheel data on or off.
, ,
F8: MIDI
119