ICON PRO-FORM 675 E User Manual page 9

6. Hold a Bolt Spacer (84) inside the lower end of
the Left Upright (77). Insert a 3/8" x 4" Bolt (5)
with a 3/8" Star Washer (12) into the Left
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (84), 3/8" x 4" Bolt
(5), and 3/8" Star Washer (12).
Hold the Left Upright Spacer (82) and the Left
Upright (77) against the Base (60). Tighten the
3/8" x 4" Bolts (5) until the heads of the Bolts
touch the Left Upright; do not fully tighten the
Bolts yet.
Press a Base Cap (85) into the Base (60). With
the help of a second person, tip the treadmill so
that the Base is flat on the floor.
7. Orient the Crossbar (78) so that the indicated
bump is in the position shown. Attach the
Crossbar to the Left Upright (77) and the Right
Upright (79) with four 1/4" x 5/8" Bolts (7); do
not fully tighten the Bolts yet.
8. Identify the Left Handrail (101).
Set the Left Handrail (101) on the Left Upright
(77). Attach the Left Handrail with three 5/16"
Star Washers (9) and three 5/16" x 3/4" Bolts
(4); do not fully tighten the Bolts yet.
6
5
12
84
84
85
60
7
7
8
101
9
77
82
78
7
Bump
77
79
4
9
4
77