Table of Contents
Advertisement
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Resetting the Device
You can reset the device if it stops responding.
Hold the device key for 8 seconds until all the LEDs turn off.
Resetting deletes the pairing connections from the device.
Thermal Safety Shutdown
To prevent overheating, the Varia device may turn off when operated at a high intensity in warm, stagnant air.
The status LED is red until the device cools down. You should use the device outdoors.
Low Temperature Battery Conservation
To extend the battery life of the device, the Varia device is limited to medium, low, and flash modes when used
in very cold temperatures.
Updating the Headlight Software With Your Edge Device
Before you can update the headlight software, you must pair the headlight with your Edge device, you must
have a Garmin Connect
™
1 Bring the Edge device within 3 m (10 ft.) of the headlight.
2 Sync your Edge device with the Garmin Connect app.
When new software is available, your device alerts you to update the software.
3 Follow the on-screen instructions.
The headlight LED flashes blue and green to indicate the device is updating. When the update is complete, the
LED flashes green ten times.
Product Updates
On your computer, install Garmin Express
This provides easy access to these services for Garmin devices:
• Software updates
• Product registration
Getting More Information
• Go to
support.garmin.com
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
Troubleshooting
Troubleshooting
account, and you must pair the Edge device with a compatible smartphone.
(www.garmin.com/express).
™
for additional manuals, articles, and software updates.
11
Advertisement
Chapters
Table of Contents
Troubleshooting
