Other Compatible Devices; Pairing Your Bike Light With Another Edge Device; Pairing The Remote With Your Varia Device - Garmin VARIA RCT715 Owner's Manual

Hide thumbs Also See for VARIA RCT715:

Table of Contents

1 Bring the Edge device within range (1 m) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other ANT+ bike lights while pairing.

2 Turn on the Edge device.

3 From the Sensors menu, select Add Sensor > Search All.

4 While the headlight is turned off, hold the Varia device key for 2 seconds to enter pairing mode.

The status LED flashes purple.

5 Select your sensor.

When the sensor is paired with your Edge device, the status icon appears solid on the connections page.

The first time you connect the Varia remote to your Varia device, you must pair the remote with your device.

1 Bring the remote within 1 m (3 ft.) of the device.

NOTE: You must stay 10 m (33 ft.) away from other ANT+ sensors while pairing.

2 While the headlight is turned off, hold the Varia device key for 2 seconds to enter pairing mode.

The status LED flashes purple.

3 On the Varia remote, hold two keys simultaneously until the status LED starts alternating green and red, and

release the keys.

The remote searches for your Varia device. After the remote pairs successfully, the status LED flashes green

12 times.

After the remote is paired, it connects to your device whenever the device is in range and turned on in smart

mode. You may need to wake the remote by selecting any key.

Other Compatible Devices

Table of Contents

Table of Contents

Varia ut800