Table of Contents
Advertisement
16. Firmly tighten the four 3/8" x 1 1/4" Screws
(3) and the four 3/8" x 3/4" Screws (4).
Next, set the Right Base Cover (79) onto the
lower end of the Right Upright (73). Then, slide
the Right Upright Cover (77) downward and
press it onto the Right Base Cover.
Next, set the Left Base Cover (78) onto the lower
end of the Left Upright (72). Then, slide the Left
Upright Cover (76) downward and press it onto
the Left Base Cover.
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 31). Note: Extra hardware may be
included.
To register your product and activate your warranty today, go to my.proform.com.
16
73
77
4
3
3
16
72
76
3, 4
79
78
Advertisement
Table of Contents
